roller cooler for powder coating manufacturers tell you that powder machinery is an equipment that effectively connects a series of processes such as spraying, recycling, and powder supply, and is one of the tools required for electrostatic powder coating. Let's take a look at the cleaning method of powder machinery:

1. Cleaning of the cyclone screen: The roller cooler for powder coating manufacturer tells you to first connect the discharger to the flange interface and seal it with a flat carton shell or stainless steel plate under the action of induced wind. Blow out the powder in the sieve with a pure air source. Then dismantle and clean the cyclone screen blade frame, disassemble the screen blade, use an adjustable wrench to clamp the cap nut, and the other person rotates the motor handle counterclockwise to push out the screen blade.
2. To clean the main and auxiliary mills, first blow it off with a pure air source. The dust will be sucked into the dust removal frame by the induced draft fan. The powder adhering to the main and auxiliary mills needs to be cleaned with acetone or Tianna water, and the inner surface of the main and auxiliary mills should be kept clean. smooth and clean.
3. Cleaning of the cyclone separator: The roller cooler for powder coating manufacturer tells you to first remove the baffle at the flange interface of the discharger, and use a pure air source to blow off the powder on the inner wall of the cyclone separator, or it is recommended to use high power for hotels A bucket vacuum removes powder adhering to the inner walls. Then disassemble the upper part of the cyclone separator, and clean the machine thoroughly after taking it out.
4. Cleaning of the dust removal cabinet: When cleaning the dust removal cabinet, first turn off the induced draft fan and cut off the power supply. Remove the dust attached to the dust bag during the cleaning process. Then, open the recovered powder discharge valve, and after the powder is discharged and cleaned, it is necessary to check: first, check whether the binding of the dust bag is loose or not. Look at closing the discharge valve and seal it tightly. Cover the discharge opening with a plastic bag, and seal it with self-adhesive tape to ensure no air leakage. Then clean the dust at the seal of the dust removal door to ensure the goodness of the seal when it is closed.
5. The roller cooler for powder coating manufacturer tells you that every time the whole machine is cleaned, it must be checked for leaks, and the installation and connection positions of various parts are strictly checked by the candle method to ensure the normal operation of the equipment.
The roller cooler for powder coating manufacturer tells you that the fine particles in the powder machinery powder coating are easy to accumulate in the head of the spray gun or the part where the airflow direction changes in the pipeline after the coating equipment. Above the object to be coated, in the construction of electrostatic spraying, the problem of environmental dust should also be paid enough attention.