1

NEWS CENTER

Position:
Homepage
/
/
/
What problems should be paid attention to in the production of Equipment for the production of powder coatings

What problems should be paid attention to in the production of Equipment for the production of powder coatings

(Summary description)Equipment for the production of powder coatings is a new technology that has been rapidly developed in our country for more than ten years. It has the characteristics of energy saving and consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder.

What problems should be paid attention to in the production of Equipment for the production of powder coatings

(Summary description)Equipment for the production of powder coatings is a new technology that has been rapidly developed in our country for more than ten years. It has the characteristics of energy saving and consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder.

Information

Equipment for the production of powder coatings is a new technology that has been rapidly developed in our country for more than ten years. It has the characteristics of energy saving and consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder. Some precautions for Equipment for the production of powder coatings must be taken seriously.

customized Equipment for the production of powder coatings
1. Check immediately after powdering. If defects are found, they should be dealt with in time. After curing, if these defects are within a small area and do not affect the surface decoration of the coating, they can be repaired with acetone. If the quality is affected in a large range, sandpaper should be used for polishing. , Remove the coating after spraying paint remover. Powder coating equipment should use powder drums, powder chambers, recycling systems, etc. to avoid contamination by other colored powders. Therefore, it needs to be cleaned up every time;
2. The powder on the Equipment for the production of powder coatings should not be exposed to the air, and the bag should be covered or tightly closed to avoid mixing of sundries;
3. In the production process of Equipment for the production of powder coatings, long-term contact between powder and skin should be avoided. The powder adhering to the skin should be washed with soap and water. Do not use solvents to ensure the safety of the painting site;
4. Equipment for the production of powder coatings not only has a short temperature interval, but also has a short bonding time. The results of the process efficiency study show that different bonding temperatures and bonding times will lead to different metal effects of powder coatings, and extending the bonding time can make the parallel direction distribution of the powder coating films more uniform.
In operation, we should also pay attention to the feeding speed and the temperature rise in the machine. The rise in body temperature will affect the output. Generally speaking, when the temperature starts to rise, if you control the feeding speed, the growth will slow down and gradually tend to For stability, if the air temperature in the machine does not exceed 40℃, production can be continued.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn