1

NEWS CENTER

Position:
Homepage
/
/
/
What problems should be paid attention to in production line for producing powder coatings

What problems should be paid attention to in production line for producing powder coatings

(Summary description)Production line for producing powder coatings is the production of powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, which is similar to paint! However, powder coatings are more environmentally friendly, have fewer harmful volatiles, and have a high recovery rate!

What problems should be paid attention to in production line for producing powder coatings

(Summary description)Production line for producing powder coatings is the production of powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, which is similar to paint! However, powder coatings are more environmentally friendly, have fewer harmful volatiles, and have a high recovery rate!

Information

Production line for producing powder coatings is the production of powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, which is similar to paint! However, powder coatings are more environmentally friendly, have fewer harmful volatiles, and have a high recovery rate!

Customized Production line for producing powder coatings
Powder coating is one of polymer synthetic materials, which has the characteristics of energy saving, low pollution and high efficiency. Not only can it be used for automobile wheels, but also can be widely used in industries such as shelves, electrical control cabinets, metal furniture, mechanical parts, electrical instrument housings, safes, air conditioner outdoor unit surface protection, fitness sports equipment, highway guardrails and other industries. The powder coating production line uses melting and solidification to transform into a hard protective coating under high temperature conditions. The coating efficiency is high, and the surface coating has good anti-corrosion performance and high mechanical strength.
Production line for producing powder coatings is a new technology that has been rapidly developed in our country for more than ten years. It has the characteristics of energy saving and consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder. Certain precautions must be taken seriously in the powder coating production line.
1. Check immediately after powdering. If defects are found, they should be dealt with in time. After curing, if these defects are within a small area and do not affect the surface decoration of the coating, they can be repaired with acetone. If the quality is greatly affected, sandpaper should be used for polishing. , Remove the coating after spraying paint remover. Powder coating equipment should use powder drums, powder chambers, recycling systems, etc. to avoid contamination by other colored powders. Therefore, it needs to be cleaned up every time;
2. The powder on the powder coating production line should not be exposed to the air, and the bag should be covered or closed tightly to avoid mixing of sundries;
3. During the production process of the powder coating production line, long-term contact between the powder and the skin should be avoided. The powder adhering to the skin should be washed with soap and water. Do not use solvents to ensure the safety of the painting site;
4. The powder coating production line not only has a short temperature interval, but also has a short bonding time. The results of the process efficiency study show that different bonding temperatures and bonding times will lead to different metal effects of powder coatings. Extending the bonding time can make the parallel distribution of the powder coating films more uniform.
In operation, we should also pay attention to the feeding speed and the temperature rise in the machine. The rise in the body temperature will affect the output. Generally speaking, when the temperature starts to rise, if you control the feeding speed, the growth will slow down and gradually tend to For stability, if the air temperature in the machine does not exceed 40℃, production can be continued.
The above is our introduction to Production line for producing powder coatings. Is it helpful to you? If you need these Production line for producing powder coatings products, you are welcome to come to our company for Production line for producing Buy powder coatings wholesale, our products will be a good choice for you, and we are willing to be your next partner.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn