NEWS CENTER
What are the characteristics of Electrostatic powder coating equipment
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-11-19
- Views:0
(Summary description)Electrostatic powder coating equipment manufacturers tell you that since powder coating spraying technology entered the coating industry, the market share of powder coatings in general industrial coatings has continued to increase year by year.
What are the characteristics of Electrostatic powder coating equipment
(Summary description)Electrostatic powder coating equipment manufacturers tell you that since powder coating spraying technology entered the coating industry, the market share of powder coatings in general industrial coatings has continued to increase year by year.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-11-19
- Views:0
Electrostatic powder coating equipment manufacturers tell you that since powder coating spraying technology entered the coating industry, the market share of powder coatings in general industrial coatings has continued to increase year by year. The reason is that powder coating technology has unique advantages.
1. Reduce environmental pollution
The manufacturer of Electrostatic powder coating equipment tells you that with the environmental protection law becoming more and more stringent on the content of organic volatiles in the atmosphere, the coating industry has been trying to develop coating technologies that are milder to the environment. After long-term research and experiments, it is found Electrostatic powder coating equipment is the cleanest coating technology currently available.
Electrostatic powder coating equipment manufacturers tell you that powder coatings do not use organic solvents, water and other volatile solvents, and are inorganic solvent-based coatings, which greatly reduces pollution caused by solvents, including poisoning of operators due to organic solvents. ; It will not cause fires due to organic solvents. Since the introduction of powder coatings, there has not been a major safety accident caused by powder coatings.
Electrostatic powder coating equipment manufacturers tell you that powder coatings are pure solid coatings, which can be fully automatically sprayed. Large amounts or super-sprayed powders can be easily collected by the recycling system to achieve the purpose of recycling. Therefore, the utilization rate of powder coatings can reach almost 100%, which enables the coating industry to reduce waste disposal costs and minimize environmental pollution.
2. Significant economic benefits
Among the components of the coating film, the solvent type is about 60% to 65%, and the powder coating can reach almost 100% efficiency, and the powder that is not attached to the object to be sprayed can be recycled and reused. Electrostatic powder coating equipment manufacturers tell you that under normal circumstances, the use of powder coating technology can make the coating work as economical and effective as possible. In the powder coating operation, if there is a poorly sprayed part, it can be blown off with an air spray gun before being baked, and then repainted. Therefore, phenomena such as surface flow paint and dripping can be avoided, and the probability of repainting and rework can be greatly reduced. Because powder spraying uses electrostatic spraying operations, the coating equipment can be almost fully automated, saving human resources. The manufacturer of Electrostatic powder coating equipment tells you that even if manual assistance is required, coating personnel can master the operating skills without long-term training. The powder coating is 100% solid content and does not need to add any solvent, so the amount of coating is reduced, the packaging is saved, and the storage space is reduced.
3. Save energy
Because powder coatings do not produce organic volatiles, the waste caused by volatilization into the atmosphere is avoided, so compared with liquid coatings, energy costs are greatly reduced. Electrostatic powder coating equipment manufacturers tell you that the electrostatic spraying equipment can get a thick film in one spray, without repeated spraying, and no primer. It is faster and more efficient than coating with the same film thickness. Electrostatic powder coating equipment manufacturers tell you that there is no need for static time in coating equipment, which can save equipment space. In addition, the baking time of powder coating is shorter than that of liquid coating, so it can greatly reduce the consumption of fuel energy, shorten the coating line, and increase the output and production efficiency.
4. Excellent film performance
The manufacturer of Electrostatic powder coating equipment tells you that as long as the powder coating is directly sprayed on the surface of the pre-treated MDF board, after baking, you can get a coating surface with excellent performance. General powder coatings have long-lasting properties of the coating film, including abrasion resistance, impact resistance, adhesion, toughness, corrosion resistance and chemical resistance. In addition to the above-mentioned advantages, powder coatings for outdoor use also include high weather resistance and pollution resistance. High-thickness coating film can be obtained by spraying powder coating at one time, and the film thickness can be between 50-300μm, and there is no dripping or stagnant phenomenon during thick coating of solvent coating.
Scan the QR code to read on your phone
Contact Us
Yantai Wutai chemical Equipment Co.,Ltd
Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong
Service Hot Line:+8613538455865
TEL:+86-535-6531018
FAX:+86-535-6908207
Email: info@wutaitech.com
Website: http://www.wutaitech.com
Copyright © Yantai Wutai chemical equipment Co.,Ltd 鲁ICP备16006892号-1 Technical Support:www.300.cn