1

NEWS CENTER

Position:
Homepage
/
/
/
Vertical Pre-mixer for powder coating manufacturers will show you what factors will affect the service life of powder equipment

Vertical Pre-mixer for powder coating manufacturers will show you what factors will affect the service life of powder equipment

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-27
  • Views:0

(Summary description)The manufacturer of Vertical Pre-mixer for powder coating tells you that powder equipment is equipment that reasonably connects various processes such as spraying, recycling, and powder supply. It is one of the methods that need to be applied to do a good job in electrostatic powder coating.

Vertical Pre-mixer for powder coating manufacturers will show you what factors will affect the service life of powder equipment

(Summary description)The manufacturer of Vertical Pre-mixer for powder coating tells you that powder equipment is equipment that reasonably connects various processes such as spraying, recycling, and powder supply. It is one of the methods that need to be applied to do a good job in electrostatic powder coating.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-27
  • Views:0
Information

The manufacturer of Vertical Pre-mixer for powder coating tells you that powder equipment is equipment that reasonably connects various processes such as spraying, recycling, and powder supply. It is one of the methods that need to be applied to do a good job in electrostatic powder coating. In itself, what aspects affect its service life?

Discount Vertical Pre-mixer for powder coating from China manufacturer
1. Select scientifically: Vertical Pre-mixer for powder coating manufacturers tell you to select machinery and equipment according to the instructions, and be careful and careful about over-temperature applications. Don’t try to save money to buy oil that does not meet the requirements, let alone mix it randomly, otherwise it will be almost impossible. If more than one month is half a year, it will cause blockage of mechanical equipment and cause a fire, with serious consequences.
2. Prevent mechanical oxidation: try to reduce the contact with gas when the temperature of mechanical equipment exceeds 50 degrees, which will cause cracking of the heat transfer oil, which is surprisingly faster and has serious adverse effects. Close the exhaust valve on the auxiliary exhaust pipe, remember.
3. Strictly control the flow velocity not to be less than 1.5 m/s. This item was originally decided by the design plan, but due to the large temperature difference between the inlet and outlet during use, the original design requirements were destroyed, so that the heat transfer oil could not be maintained. In the seepage state, the boundary layer thickens and the heat transfer coefficient increases, so that the mechanical equipment wall exceeds the appropriate humidity, resulting in mechanical cracking, polymerization, carbon deposition, coke and even burning through the furnace tube.
4. Sudden power failure, the circulation pump is terminated, and the flow rate is equal to 0. The manufacturer of Vertical Pre-mixer for powder coating tells you that because the refractory regenerator in the furnace continues to release heat, the heat transfer oil in the furnace tube is overheated, resulting in cracking and coking. Long-term accumulation will cause the furnace tube to blow up and cause a catastrophe . Therefore, it is prescribed to operate according to the instructions.
In addition, if the powder equipment shuts down unexpectedly, strictly follow the indicated operating procedures. Usually, the heat transfer oil temperature will drop below 100 degrees to stop the heat oil pump. The Vertical Pre-mixer for powder coating manufacturer tells you that at the same time, carefully and carefully operate over-temperature at will, add more fuel, increase the air volume, and make it in an over-temperature state, so that it will appear in cracking and coking, and it will also occur in the long run. ACCIDENT.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn