1

NEWS CENTER

Position:
Homepage
/
/
/
Vertical Pre-mixer for powder coating manufacturers take you to understand the precautions in the production of powder production lines

Vertical Pre-mixer for powder coating manufacturers take you to understand the precautions in the production of powder production lines

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-21
  • Views:0

(Summary description)The manufacturer of Vertical Pre-mixer for powder coating tells you that the powder production line produces powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, specifically, it is similar to paint!

Vertical Pre-mixer for powder coating manufacturers take you to understand the precautions in the production of powder production lines

(Summary description)The manufacturer of Vertical Pre-mixer for powder coating tells you that the powder production line produces powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, specifically, it is similar to paint!

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-21
  • Views:0
Information

The manufacturer of Vertical Pre-mixer for powder coating tells you that the powder production line produces powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, specifically, it is similar to paint! However, powder coatings are more environmentally friendly, have less harmful volatiles, and have a high recovery rate!

Low price Vertical Pre-mixer for powder coating on sales
Powder coating is one of polymer synthetic materials, which has the characteristics of energy saving, low pollution and high efficiency. Not only can it be used for automobile wheels, but it can also be widely used in shelves, electrical control cabinets, metal furniture, mechanical parts, electrical instrument shells, safes, surface protection of air conditioner outdoor units, fitness equipment, highway guardrails and other industries. The Vertical Pre-mixer for powder coating manufacturer tells you that the powder coating production line uses melting and solidification to transform into a hard protective coating under high temperature conditions. The coating efficiency is high, and the surface coating has good anti-corrosion performance and high mechanical strength.
The powder production line is a new technology that has been developed rapidly in my country for more than ten years. It has the characteristics of energy saving, consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder. Some precautions must be taken seriously in the powder coating production line.
1. Check immediately after powder coating. If defects are found, they should be dealt with in time. After curing, if these defects do not affect the coating surface decoration in a small range, they can be repaired with acetone. If the quality is affected in a large range, use sandpaper to polish , Spray paint remover and then remove the coating. Vertical Pre-mixer for powder coating manufacturers tell you that powder coating equipment should use powder drums, powder chambers, recovery systems, etc. to avoid other colored powder pollution. Therefore, it needs to be cleaned up every time.
2. The powder on the powder coating production line should not be exposed to the air, and the bag should be covered or tightly closed to avoid the mixing of sundries.
3. During the production process of the powder coating production line, long-term contact between the powder and the skin should be avoided. Powder that adheres to the skin should be washed with soap and water. Do not use solvents to ensure the safety of the painting site.
4. The powder coating production line not only has a very short temperature interval, but also has a very short bonding time. The vertical pre-mixer for powder coating manufacturer tells you that the process efficiency research results show that different bonding temperatures and bonding times will lead to different powder coating metal effects, and prolonging the bonding time can make the distribution of the powder coating film in the parallel direction more uniform.
In operation, we should also pay attention to the feeding speed and the temperature rise inside the machine. The rise of the body temperature will affect the output. Generally speaking, when the temperature starts to rise, if you control the feeding speed, the growth will slow down and gradually tend to If the air temperature in the machine does not exceed 40°C, the production can continue.
The above is our introduction to the powder production line. Is it helpful to you? The manufacturer of Vertical Pre-mixer for powder coating tells you that if you need these products, you are welcome to visit our company for purchase. We The products will be a good choice for you, and we are willing to be your next partner.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn