Come to work happily and go home healthy is the propaganda slogan of our use of radiostatic powder coating equipment. It is very important to know how to use this equipment correctly. Let's take a look at the problems we should pay attention to. What are some!

1. According to the size of the workpiece, different calibers can be used. Generally speaking, 5~6mm caliber can be used for spraying small areas, and 6mm or more caliber can be used for large areas. Different types of paint have different specific gravity. If the specific gravity is large, the wind pressure can be increased, but the wind pressure must not exceed the strength of the electromagnetic field. Electrostatic powder coating equipment manufacturers tell you that electrostatic generators can not only be used for painting, but also can replace high-frequency spark detectors to solve construction problems such as plastic linings, and can also be used for cement spraying and plastic spraying.
2. The manufacturer of electrostatic powder coating equipment tells you that when performing electrostatic spraying, you should also pay attention to the distance between the suspended workpiece and the ground must be more than 1 meter, and the distance between the workpiece and the workpiece is under the premise of not colliding with each other. The smaller the distance, the better Okay. The rotation speed of the spray gun is also very important. Generally, the speed of the cyclone spray gun is 800 rpm, while the speed of the rotary cup spray gun must be greater than 1000 rpm. If the two spray guns are not working on the same plane, the distance can be closer.
3. In addition, because the DC voltage used by the electrostatic powder coating equipment is as high as 100,000 volts, an accident will occur if you are not careful. Therefore, you must pay attention to the safety of operation.
Experts said that in order to improve the efficiency of the electrostatic powder coating equipment, two or more spray guns are often used for spraying at the same time. At this time, because the paint mists with the same charge repel each other and affect the quality of the coating film, the distance between the two spray guns should be at least 1 meter.