I. Repair of abrasion of grinding roll and disc lining of ACM series grinding system

During the use of roll body and wear-resistant liner of ACM series grinding system, once the matching gap occurs, the wear between the body and liner will be aggravated. In addition, the continuous scouring of matching surface by hot air and cement particles will lead to the generation of grooves, resulting in impact and impact in ACM series grinding system, in which the liner will crack or even break in serious cases.Machine damage, especially reduction gear, causes malicious incidents.

Once such problems occur, the general repair method is difficult to solve and the replacement cost is high.Polymer composites have excellent mechanical properties and good plasticity, which can be effectively solved.

II. Repair of wear on bearing chamber of grinder roll

The assembly requirements for roll bearings of ACM series grinding system grinder are quite stringent. Enterprises usually use the method of cooling the bearings in dry ice to assemble them.Once clearance between bearing and bearing chamber occurs, it will affect the normal operation of the bearing, causing the bearing to heat up, and in serious cases, it will cause the bearing to burn.ACM series grinding system is fast, easy to operate and can be repaired on site in many cases.

III. Leakage control of reduction gear of grinder

The leakage of reducer of ACM series grinding system grinder not only affects the appearance of the machine, but also wastes oil, causing great trouble for the maintenance of equipment.ACM series grinding system can be operated without shutdown in most cases. It is simple and effective to control leakage on the spot.