Twin Screw Extruders for Powder Coatings is developed on the basis of single screw extruder. Due to its good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics, it has been widely used in extrusion products. forming process.

Routine Maintenance of Twin Screw Extruders for Powder Coatings:
1. After 500 hours of use, there will be iron filings or other impurities from the gears in the gear box, so the gears should be cleaned and the gear box lubricating oil should be replaced.
2. After a period of use, conduct a comprehensive inspection of the extruder to check the tightness of all screws.
3. The manufacturer of Twin Screw Extruders for Powder Coatings tells you that if there is a sudden power failure during production, the main drive and heating will stop. When the power supply is restored, each section of the barrel must be reheated to the specified temperature and kept for a period of time before the extrusion can be started. machine.
4. If the steering fullness of the instrument and pointer is found, check whether the contact between the thermocouple and other side lines is good.
The daily maintenance of Twin Screw Extruders for Powder Coatings is introduced here, I hope it will help you.