The manufacturer of Grinding and Classifying Systems for powder coating tells you that although powder equipment has brought great convenience to our lives, it is a standing product in our production. But once the water leaks, it will also have some impact on our production progress, so we must first understand the relevant knowledge before installation and use, which is also very helpful to prevent equipment leakage in the future. Let's take a look at the reasons for the leakage of powder equipment.

1. Excessive water pressure: The manufacturer of Grinding and Classifying Systems for powder coating tells you that the reason for the water leakage is not reading the manual carefully and not using the heater correctly. Once the water pressure of the heating stove is too high, the heating stove will discharge the excess water in order to reduce the pressure of the equipment, which is the cause of the leakage of the heating stove. Therefore, when the water pressure of the heating stove is supplemented to 0.15 MPa, the water supplement valve must be closed.
2. Water leakage at the connection: The manufacturer of Grinding and Classifying Systems for powder coating tells you that most of the reasons for the water leakage of the equipment are at the connection, whether it is a local leak around the wall-hung boiler or a water storage tank or water pipe. The situation is that there is a problem with the sealing of the joint.
3. Incorrect use: The manufacturer of Grinding and Classifying Systems for powder coating tells you to maintain good ventilation in the room when using powder equipment. When the wall-hung boiler has a problem that cannot be solved by yourself, it is strictly prohibited to disassemble it without authorization. You should find the after-sales maintenance department or the manufacturer of the wall-hung boiler to repair it.
The above are the three major causes of water leakage in powder equipment. The manufacturer of Grinding and Classifying Systems for powder coating tells you that because many families now like to use powder equipment, it can help us provide hot water and heat, which can be described as killing two birds with one stone. The manufacturer of Grinding and Classifying Systems for powder coating tells you that this kind of heating furnace can not only provide us with warmth, but also add convenience to life, but there will also be water leakage during the use of the heating furnace.