Equipment for the production of powder coatings The manufacturer tells you that the manufacturing technology of powder coatings is based on equipment widely used in the plastics and micropowder chemical industries, so the design of powder machinery is completely different from ordinary liquid coatings. The production of powder machinery includes connecting different sections in a reasonable order. Work. Equipment for the production of powder coatings manufacturers tell you that in general, small-scale powder coating factories require discontinuous production processes. For factories with higher production capacity, each separate process needs to be concentrated into a continuous production process part. Equipment for the production of powder coatings manufacturers tell you that we can solve the noise in the production of powder machinery in these ways.

1. Eliminate cavitation: Equipment for the production of powder coatings manufacturers tell you that cavitation is the main source of hydrodynamic noise. During cavitation, the burst of bubbles produces high-speed impact, which causes strong local turbulence and cavitation noise. This noise has a wide frequency range and produces a rattling sound similar to that produced by fluid containing sand and gravel. Eliminating and reducing cavitation is an effective way to eliminate and reduce noise.
2. The manufacturer of Equipment for the production of powder coatings tells you that the main motor makes abnormal noise, the bearing of the main motor is damaged, and a certain thyristor in the thyristor rectifier circuit of the main motor is damaged. The main motor bearing can be replaced, the thyristor rectifier circuit can be checked, and the thyristor element can be replaced if necessary.
3. Sound-absorbing material: Equipment for the production of powder coatings The manufacturer tells you that this is also a common and effective sound path treatment method for powder mechanical noise reduction. Noise sources and lines can be covered with sound-absorbing material. Because noise travels long distances through fluid flow, where the sound-absorbing material wraps, where thick-walled pipes are used, the effectiveness of noise cancellation ends.
The above are several effective ways that powder machinery often uses when noise occurs. Equipment for the production of powder coatings manufacturers tell you that powder machinery is not only suitable for the mixing of common materials in various industries, but also for the mixing of materials with high oil content, high sugar content, high viscosity, flammable, explosive, heating and curing, and heating and softening materials.