1

NEWS CENTER

Position:
Homepage
/
/
/
Drum Coolers and Conveyors for powder coating manufacturers take you to understand what problems should be paid attention to in the production of powder production lines

Drum Coolers and Conveyors for powder coating manufacturers take you to understand what problems should be paid attention to in the production of powder production lines

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-12
  • Views:0

(Summary description)Drum Coolers and Conveyors for powder coating manufacturers tell you that the powder production line produces powder coatings, both thermoplastic and thermosetting.

Drum Coolers and Conveyors for powder coating manufacturers take you to understand what problems should be paid attention to in the production of powder production lines

(Summary description)Drum Coolers and Conveyors for powder coating manufacturers tell you that the powder production line produces powder coatings, both thermoplastic and thermosetting.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-12-12
  • Views:0
Information

Drum Coolers and Conveyors for powder coating manufacturers tell you that the powder production line produces powder coatings, both thermoplastic and thermosetting. It is mainly used to decorate the metal surface, specifically, it is similar to paint! However, powder coatings are more environmentally friendly, have less harmful volatiles, and have a high recovery rate!

Wholesale Drum Coolers and Conveyors for powder coating supplier(s) china
Powder coating is one of polymer synthetic materials, which has the characteristics of energy saving, low pollution and high efficiency. Drum Coolers and Conveyors for powder coating manufacturers tell you that it can not only be used for car wheels, but also widely used in shelves, electrical control cabinets, metal furniture, mechanical parts, electrical instrument shells, safes, air conditioner outdoor unit surface protection, fitness sports Equipment, highway guardrail and other industries. The powder coating production line uses melting and solidification to transform into a hard protective coating under high temperature conditions. The coating efficiency is high, and the surface coating has good anti-corrosion performance and high mechanical strength.
The powder production line is a new technology that has been developed rapidly in my country for more than ten years. It has the characteristics of energy saving, consumption reduction, environmental pollution reduction, simple process, easy automation, durable coating, and recyclable powder. Some precautions must be taken seriously in the powder coating production line.
1. Check immediately after powder coating. The Drum Coolers and Conveyors for powder coating manufacturer tells you that if any defects are found, they should be dealt with in time. After curing, if these defects do not affect the coating surface decoration within a small range, they can be repaired with acetone. If If the quality is affected in a large range, use sandpaper to polish, spray paint remover and then remove the coating. Powder coating equipment should use powder drums, powder chambers, recovery systems, etc. to avoid contamination by other colored powders. Therefore, it needs to be cleaned every time;
2. The powder on the powder coating production line should not be exposed to the air, and the bag should be covered or tightly closed to avoid the mixing of sundries;
3. During the production process of the powder coating production line, long-term contact between the powder and the skin should be avoided. Powder that adheres to the skin should be washed with soap and water. Do not use solvents to ensure the safety of the painting site;
4. The powder coating production line not only has a very short temperature interval, but also has a very short bonding time. The results of the process efficiency study show that different bonding temperatures and bonding times will lead to different metal effects of powder coatings, and prolonging the bonding time can make the distribution of powder coating films in the parallel direction more uniform.
The manufacturer of Drum Coolers and Conveyors for powder coating tells you that during operation, we should also pay attention to the feeding speed and the temperature rise inside the machine. The temperature rise of the body will affect the output. Generally speaking, when the temperature starts to rise, if you control the feeding speed , the growth will slow down and gradually stabilize, if the air temperature inside the machine does not exceed 40°C, production can continue.
The above is the introduction of Drum Coolers and Conveyors for powder coating manufacturers to the powder coating production line. Is it helpful to you? If you need these products, you are welcome to visit our company for purchase. Our products will be It will be a good choice for you, and we are willing to be your next partner.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn