NEWS CENTER
Drum Coolers and Conveyors for powder coating manufacturers take you to understand the three major causes of water leakage in powder equipment
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2022-07-04
- Views:0
(Summary description)Drum Coolers and Conveyors for powder coating manufacturers tell you that although powder equipment has brought great convenience to our life, it is a standing product in our production.
Drum Coolers and Conveyors for powder coating manufacturers take you to understand the three major causes of water leakage in powder equipment
(Summary description)Drum Coolers and Conveyors for powder coating manufacturers tell you that although powder equipment has brought great convenience to our life, it is a standing product in our production.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2022-07-04
- Views:0
Drum Coolers and Conveyors for powder coating manufacturers tell you that although powder equipment has brought great convenience to our life, it is a standing product in our production. However, once the water leaks, it will also have some impact on our production progress, so we must understand the relevant knowledge before installation and use, which is also very helpful to prevent the water leakage problem of the equipment in the future. Let's let Drum Coolers and Conveyors for powder coating manufacturers take you to understand the reasons for the leakage of powder equipment.
1. Excessive water pressure: In fact, the reason for this kind of water leakage is that you did not read the instructions carefully and did not use the heater correctly. Drum Coolers and Conveyors for powder coating manufacturers tell you that once the water pressure of the heater is too high, the heater will drain the excess water in order to reduce the pressure of the equipment, which is why the heater leaks. Therefore, when the water pressure of the heating furnace is supplemented to 0.15MPa, the water supplement valve must be closed.
2. Water leakage at the connection: Most of the reasons for the leakage of the equipment are on the connection. Whether it is the local water leakage around the wall-hung boiler or the water leakage of the water storage tank or the water pipe, in most cases, the sealing of the connection is faulty.
3. Improper use: keep the room well ventilated when using powder equipment. Drum Coolers and Conveyors for powder coating manufacturers tell you that when the wall-hung boiler has a problem that cannot be solved by itself, it is strictly forbidden to disassemble it without authorization, and you should contact the after-sales maintenance department or manufacturer related to the wall-hung boiler for repair.
The above are the three major reasons for the leakage of powder equipment that Drum Coolers and Conveyors for powder coating manufacturers have brought you to understand. In addition, since many families now like to use powder equipment, it can provide us with hot water and heating, which can be said to kill two birds with one stone.
Scan the QR code to read on your phone
Contact Us
Yantai Wutai chemical Equipment Co.,Ltd
Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong
Service Hot Line:+8613538455865
TEL:+86-535-6531018
FAX:+86-535-6908207
Email: info@wutaitech.com
Website: http://www.wutaitech.com
Copyright © Yantai Wutai chemical equipment Co.,Ltd 鲁ICP备16006892号-1 Technical Support:www.300.cn