First of all, please allow me to give you a brief introduction. The ACM series grinding system is the key equipment of the entire powder coating production line. It has the functions of high-speed grinding, classification, cyclone sieving, fine powder collection, etc., and is widely used in pigments, calcium, carbonates , Medicine, food and other industries.

Its characteristics are mainly as follows:

1. Uniform and stable particle distribution

2. Adjustable particle size

3. High output capacity

4. Higher recovery rate ≥98%

5. Easy to clean and maintain

6. Operational safety

7. Monitor the humidity of the mill (optional)

8. Cyclone dual cooling

9. Open/close the cover of the mill by electricity/air

10. Casting the main body of the fan with lower noise.

Based on the extensive use of domestic and foreign advanced technology, the ACM series grinding system is also combined with many years of experience in the production of various mills and ACM series grinding systems to design and develop this advanced ACM series grinding system equipment .

It is an ideal equipment that integrates crushing, drying, grinding, grading and conveying. It can be widely used in industries such as cement, electric power, metallurgy, chemical industry, non-metallic mines, etc. to grind block, granule and powder raw materials into required powder materials.

When the ACM series grinding system is in normal operation, the motor drives the grinding disc to rotate through the reducer, so that the material passes through the lock air feeder from the inlet to the center of the grinding disc, and hot air enters the mill from the air inlet. Under the force of the rotating rotor, the coarse powder falls from the cone to the grinding plate China, and the grinding process is repeated. Qualified fine powder will be milled along with the air flow. The materials containing moisture are gradually dried during the contact process with the hot air flow. By adjusting the temperature of the hot air, the requirements of materials with different humidity can be met, and then it can reach the required moisture range.

With the continuous rotation of the grinding disc, the material starts to move to the edge of the grinding disc under the action of centrifugal force, and is crushed by the grinding roller to achieve a crushed state. The crushed materials are carried by the high-speed airflow of the wind ring at the edge of the grinding disc. Large particles of materials will directly fall on the grinding disc and go through the grinding step again. When the materials in the airflow pass through the upper separator, the separator can be adjusted to achieve different The required thickness of the product.

This is the basis for the specific operation of the new ACM series grinding system. After reading its operation process, do you want to buy it back right away?

YANTAI WUTAI CHEMICAL EQUIPMENT CO.,LTD is a specialized manufacturer in China for powder coating machinery with a wealth of experience and about thirty years history.

Depending on leading science and technology, satisfied quality, sincere services, and various series products, Wutai products have been sold to over twenty provinces, regions and municipalities in china and more than 30 countries in overseas market.

Wutai mainly offers high speed pre-mixer, single/twin screw extruder, cooling belt and ACM series grinding system  for powder coating production line. Wutai's policy is to focus on the main products and keep development ,and carrying on “customer first, quality best and keep what promised to the users.”

Sincerely welcome old and new customers to visit our company for long term cooperation.