1

NEWS CENTER

Position:
Homepage
/
/
/
Application of Vertical Pre-mixer for powder coating products

Application of Vertical Pre-mixer for powder coating products

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-30
  • Views:0

(Summary description)Vertical Pre-mixer for powder coating products are designed and developed based on the extensive use of advanced technologies at home and abroad, and combined with years of experience in the production of various mills, Vertical Pre-mixer for powder coating.

Application of Vertical Pre-mixer for powder coating products

(Summary description)Vertical Pre-mixer for powder coating products are designed and developed based on the extensive use of advanced technologies at home and abroad, and combined with years of experience in the production of various mills, Vertical Pre-mixer for powder coating.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-30
  • Views:0
Information

Vertical Pre-mixer for powder coating products are designed and developed based on the extensive use of advanced technologies at home and abroad, and combined with years of experience in the production of various mills, Vertical Pre-mixer for powder coating. Vertical Pre-mixer for powder coating product equipment. It is an ideal equipment that integrates crushing, drying, grinding, grading and conveying. It can be widely used in industries such as cement, electric power, metallurgy, chemical industry, non-metallic mines, etc. to grind lump, granule, powder raw materials into required powder materials.

good price and quality Vertical Pre-mixer for powder coating in china
When Vertical Pre-mixer for powder coating products are in normal operation, the motor drives the grinding disc to rotate through the reducer, allowing the material to fall into the middle of the grinding disc from the inlet through the lock air feeder, and at the same time hot air enters the mill from the air inlet. The manufacturer of Vertical Pre-mixer for powder coating should tell you that under the force of the rotating rotor, the coarse powder falls from the cone to the grinding plate China, and the grinding process is restarted. Qualified fine powder will be milled along with the air flow. The moisture-containing materials are gradually dried during contact with the hot air flow. By adjusting the temperature of the hot air, the requirements of materials with different humidity can be met, and then it can reach the required moisture range.
The manufacturer of Vertical Pre-mixer for powder coating tells you that as the grinding disc continues to rotate, the material starts to move towards the edge of the grinding disc under the action of centrifugal force, and is crushed by the grinding roller. The manufacturer of Vertical Pre-mixer for powder coating tells you that the pulverized material is carried by the high-speed airflow of the wind ring at the edge of the grinding disc, and the large particle material will directly fall on the grinding disc and go through the grinding step again. The material in the airflow passes through the upper separator. At the time, the separator can be adjusted to achieve the required thickness of different products.

Keyword:

Scan the QR code to read on your phone

Contact Us

 

Yantai Wutai chemical Equipment Co.,Ltd

Address: No. 26, Mingda West Road, Laishan District, Yantai, Shandong

Service Hot Line:+8613538455865
TEL:
+86-535-6531018
FAX:+86-535-6908207
Email: 
info@wutaitech.com
Website: http://www.wutaitech.com

 

Copyright © Yantai Wutai chemical equipment Co.,Ltd      鲁ICP备16006892号-1      Technical Support:www.300.cn