After the Drum Coolers and Conveyors for powder coating equipment is used, daily maintenance work needs to be done, which can prolong the service life of the product. The following will introduce the specific maintenance methods:

1. During the use of the equipment, the main shaft of the equipment must be refueled for each shift. At the same time, it is necessary to grasp that the oil filling time cannot be too short or too long. During the oil filling period, the operator should also grasp the amount of oil, not too much or too much. Less, otherwise it will have a certain impact on the equipment.
2. Since the Drum Coolers and Conveyors for powder coating equipment is mainly for crushing stones, the materials near the characteristics of the stones can also be crushed, but non-crushing materials such as metals cannot be crushed. If the non-broken material enters the crushing cavity during the period when the equipment is crushing stones, it will cause serious damage to the equipment, and will cause certain damage to the grinding rollers, grinding rings, intermediate hangers, etc., which will affect the normal operation of the equipment.
 Generally speaking, the air volume control valve is on the top of the fan intake pipe. Usually, the air volume needs to be adjusted to the position during the normal operation of the Drum Coolers and Conveyors for powder coating equipment. Adjust the air volume according to the user's demand for product fineness and output value. After adjusting the valve, the dust of the Drum Coolers and Conveyors for powder coating equipment can be controlled until the equipment is adjusted to stop generating dust.